BIUGED – Computer Servo Tensile Machine
Introduction：Computer Servo Tensile Machine is a new type of material machine which combines the electronic technology and mechanical transmission. It can make all kinds of function true, do the data analysis and print the test result by computer controls the operation of machine. The communication between machine and computer usually adopts USB interface. It has wide accuracy acceleration and test force range, not only measuring and controlling the load and displacement in higher accuracy and sensitively, but also doing the control test by automatically of isokinetic load and displacement. It operates easily and conveniently, especially applied in inspect instruments which is used for controlling products of produce line. This series of Servo Tensile Machines is mainly suit for nonmetal and metal test with test load less than 10KN.
These machines have a wide usage range, can test all sorts of materials, such as end products and semi-manufactures dumbbell specimen of plastic (cloth tube plate), rubber (plate tube), metal wire, tape, wheel, textile, acrylic, FRP, EVA, PE and shoes etc, testing their functions which include tensile strength, elongation, tearing, stripping, glue force etc.
Features：
◆ Standards：ASTM D 903、GB/T 16491、GB/T 1040、GB/T 8808、GB 13022、GB/T 2790 etc.
◆ Sensor with high accuracy （transmission mechanism adopts high accuracy ball screw）
◆ Sampling frequency of Data：200 times/s
◆ It can storage numerous testing results of reference points, counting the average and grasping the Max which exist on the point of broken by automatically.
◆ The setting range of broken proportions：0～99%, you can set it according to the test demand of different specimen at you will, make the downtime true on different point.
◆ Safety set：Overload, urgent downtime set, up and down process limited set.
◆ The collection with synchronous puts into practice by true, 24 bites AD transformed, resolution is up to 1/500,000，and it oversteps the same industry level absolutely.
◆ Thousands of clamps and clamps set for choosing.
◆ With several sensors supported, it can satisfy with different range demands by assembling several sensors at the same time.
◆ User can calculate elastic modulus, yield point, constant residual strength, constant elongation, constant force deformation and maximum strength. There are other special professional calculations, such as the calculation of belt stripping and the elongation at yield point.
◆ Optional measure and control system of professional test machine, which can realize the closed loop of force value, deformation and position, so that the tensile machine can carry out curve control tests freely, such as low frequency cycle (fatigue) test, step test and force value holding (creep) test.
| Measure and Control System →
Function ↓ |
Standard open-loop control system
（standard configuration） |
Standard open-loop control system
（optional） |
| Position (displacement speed) | √ | √ |
| Force（force value speed） | × | √ |
| Deformation | × | √ |
| Multiple Control （position, force, deformation control exchange） | × | √ |
| Cycle control | × | √ |
Đánh giá
Chưa có đánh giá nào.