BIUGED – Cyclic Corrosion Test（CCT）Cabinets
For most artifical accelerated tests in laboratory, getting a consistent testing results with outdoor is the most important purpose. Prior to cyclic corrosion testing, conventional salt spray (a continuous salt spray at 35˚C), was the most popular way to simulate corrosion in a lab. Because conventional salt spray methods failed to simulate the natural wet/dry cycles of the outdoors, test results frequently provided poor correlation to outdoors.
| Ordering Information →
Technical Parameters ↓ |
BGD 886/S | BGD 887/S | BGD 888/S |
| Working Room Size（W×H×D），mm | 900×400×600 | 1250×500×1000 | 1600×500×1000 |
| Working Room Capacity
（no including V shape cover） |
216 L | 600 L | 800 L |
| Overall Size（W×H×D），mm | 2450×1550×1430 | 2830×1560×1830 | 3230×1656×1830 |
| Power/Max. Current | 16KW/21A | 23.6KW/28A | 28KW/35A |
| Power Supply | AC 380V 3 phase 20A | AC 380V 3 phase 23A | AC 380V 3 phase 25A |
| Temperature Range | RT+10℃～80℃ | ||
| Temperature Uniformity | ± 2℃ | ||
| Temperature Stablity | ± 0.5℃ | ||
| Humidity Range | 20%～98% | ||
| Humidity Uniformity | ± 5% RH | ||
| Humidity Stablity | ± 2% RH | ||
| Salt Fog Precipitation | 1～2ml/ 80cm2.h（Adjustable） | ||
| Spray Method | Continuous or Cyclical | ||
| Required Work Environment | Tem.: 5～30℃；RH: 45%～85%RH；Barometric Pressure：86kPa～106kPa | ||
| Required Air Supply | Air consumption: 1m3/h, Pressured air without water and oil which has been dried and filtered, pressure is （0.4～0.8）Mpa | ||
| Required Water Supply | Supplied by tap water, which is used for humidifier to pressure, heat and filter air. Water pressure should be （0.2～0.4）Mpa
Note：Distilled water or deionized water is required for preparing spray solution, water consumption is near 20L/24hour under continuous spraying） |
||
Đánh giá
Chưa có đánh giá nào.