Product Details:

What is the extensometer?
The electronic extensometer is a sensor that measures the deformation of the test piece. The strain gauge extensometer is a widely used type due to its simple principle and convenient installation.
Electronic extensometers can be divided into axial extensometers, lateral extensometers, and clip extensometers according to the measurement object.

Introduction of the YYU extensometer:
YYU series axial deformation extensometer is suitable for testing of metal and non-metal materials. Including conventional extensometer, average strain extensometer, special extensometer (large gauge steel strand, concrete, rock, wood, etc.)
Used to measure elastic modulus E, prescribed non-proportional elongation strength RP, prescribed total elongation strength Rt, various elongations, strain hardening index n and other parameters.

Using method:
YYU series extensometer mounting card: Use two fingers to gently pinch the extensometer’s two force arms to make the gauge rod contact the force arm, and insert the attached gauge sheet opening between one of the force arm and the gauge rod between. Using an extensometer hook, secure the extensometer to the specimen with a rubber band.

Note: The holding force should be appropriate, and the center line of the two knife edges should be parallel to and aligned with the axis of the sample.
After the inspection is correct, remove the gauge plate so that a distance of about 0.5mm is maintained between the force arm and the gauge rod.
For YYU series extensometers using spring clamps, please refer to Article 2 and special precautions.