Standard Equipment
- Tmax 300 °C
- Working temperature range: + 20 °C above room temperature up to 300 °C
- Ovens TR 30 – TR 420 designed as tabletop models
- Ovens TR 450 – TR 1050 designed as floor standing models
- Horizontal forced air circulation results in temperature uniformity according to DIN 17052-1 better than +/− 5 °C in the empty oven (with closed exhaust air flap)
- Stainless steel furnace housing, material no. 1.4016 (DIN)
- Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean
- Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
- Charging in multiple layers possible using removeable grids (number of removeable grids included, see table)
- Large, wide-opening swing door, hinged on the right with quick release for models TR 30 – TR 240 and TR 450
- Double swing door with quick release for models TR 420, TR 800 and TR 1050
- Ovens TR 800 and TR 1050 equipped with transport castors
- Infinitely adjustable exhaust at the rear wall with operation from the front
- PID microprocessor control with self-diagnosis system
- Models TR .. LS: Safety technology according to EN 1539 for charges containing liquid solvents, achievable temperature uniformity +/− 8 °C according to DIN 17052-1 in the empty oven (with closed exhaust air flap)
- Controller R7 (resp. C450 for TR ..LS)
- Solid state relays provide for lownoise operation
- Defined application within the constraints of the operating instructions
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
As one of the world’s largest furnace manufacturers, Nabertherm has many years of experience in the design and manufacture of standardized and customer-specific control systems. All controls are characterized by a very high level of operating convenience and even the basic version has extensive basic functions. Depending on the requirements, the functions can be expanded and adapted to your needs. Professional software solutions for single or multiple furnace management as well as process and batch documentation based on our Nabertherm controllers complete the range.
Also for compliance with industry-specific standards that define process control and documentation, such as for example, the AMS2750F for aviation, the CQI-9 in the automotive industry or the FDA in the pharmaceutical industry we offer standardized solutions.
Additional Equipment
- Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the oven and load
- Fan speed of the air circulation fan can be reduced infinitely
- Window for charge observing
- Further removeable grids with rails
- Side inlet
- Electrical rotary device (associated sample holder will be individually adapted to the charge)
- Exhaust air duct DN 80
- Transport castors for models TR 240 – TR 450
- Upgrading available to meet the quality requirements of AMS2750F or FDA
- Process control and documentation via VCD software package for monitoring, documentation and control
- Fresh-air filter to reduce dust inside the furnace
TECHNICAL SPECIFICATIONS
| Model | Tmax | Inner dimensions in mm | Volume | Outer dimensions1 in mm | Connected | Electrical | Weight | Minutes | Grids | Grids | Max. | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| in °C | w | d | h | in l | W | D | H | load in kW | connection | in kg | to Tmax 2 | included | max. | total load 3 | |
| TR 30 | 300 | 360 | 300 | 300 | 30 | 610 | 570 | 665 | 2.1 | 1-phase | 45 | 25 | 1 | 4 | 80 |
| TR 60 | 300 | 450 | 390 | 350 | 60 | 700 | 610 | 710 | 3.1 | 1-phase | 90 | 25 | 1 | 4 | 120 |
| TR 60 LS | 260 | 450 | 360 | 350 | 60 | 700 | 820 | 710 | 5.3 | 3-phase | 100 | 25 | 1 | 4 | 120 |
| TR 120 | 300 | 650 | 390 | 500 | 120 | 900 | 610 | 860 | 3.1 | 1-phase | 120 | 45 | 2 | 7 | 150 |
| TR 120 LS | 260 | 650 | 360 | 500 | 120 | 900 | 820 | 870 | 6.3 | 3-phase | 120 | 45 | 2 | 7 | 150 |
| TR 240 | 300 | 750 | 550 | 600 | 240 | 1000 | 780 | 970 | 3.1 | 1-phase | 165 | 60 | 2 | 8 | 150 |
| TR 240 LS | 260 | 750 | 530 | 600 | 240 | 1000 | 990 | 970 | 6.3 | 3-phase | 180 | 60 | 2 | 8 | 150 |
| TR 420 | 300 | 1300 | 550 | 600 | 420 | 1550 | 815 | 970 | 6.3 | 3-phase | 250 | 60 | 2 | 8 | 200 |
| TR 450 | 300 | 750 | 550 | 1100 | 450 | 1000 | 780 | 1470 | 6.3 | 3-phase | 235 | 60 | 3 | 15 | 180 |
| TR 450 LS | 260 | 750 | 530 | 1100 | 450 | 1000 | 990 | 1470 | 12.6 | 3-phase | 250 | 60 | 3 | 15 | 180 |
| TR 800 | 300 | 1200 | 670 | 1000 | 800 | 1470 | 970 | 1520 | 6.3 | 3-phase | 360 | 80 | 3 | 10 | 250 |
| TR 1050 | 300 | 1200 | 670 | 1400 | 1050 | 1470 | 970 | 1920 | 9.3 | 3-phase | 450 | 80 | 4 | 14 | 250 |
| 1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request* 2In the empty and closed oven, connected to 230 V 1/N/PE resp. 400 V 3/N/PE 3Max load per layer 30 kg |
|||||||||||||||
Đánh giá
Chưa có đánh giá nào.